Netgear WC7520 Uživatelský manuál Strana 68

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 213
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 67
Configuring Network Settings
68
ProSafe 20-AP Wireless Controller WC7520
Figure 30.
The DHCP Server List shows the DHCP servers that are already configured on the
wireless controller.
2. Click Add.
The Add DHCP Server pop-up window displays:
Figure 31.
3. Configure the settings as explained in the following table:
Table 11. DHCP settings
Setting Description
Enabled Select this check box to enable the DHCP se
rver. When the check box is cleared,
the DHCP server is disabled.
Use VLAN Interface Select this check box to allow the DHCP server to function with multiple VLANs.
VLAN Enter the DHCP server VLAN ID. The range is between 1 and 4094. The DHCP
server will service this VLAN.
IP Network Enter the IP address for the wireless controller in the VLAN that you have
specifie
d in the VLAN field. If you have not selected the Use VLAN Interface
check box, the IP address of the wireless controller’s management VLAN is
used.
Zobrazit stránku 67
1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 212 213

Komentáře k této Příručce

Žádné komentáře