Netgear R6220 Uživatelský manuál stáhnout pdf (Strana 118)

Network Settings

118

AC1200 Smart WiFi Router with External Antennas

4. Select Wireless.

You can specify the settings for the 2.4 GHz band and for the 5 GHz band.

5. In the Region list, select your region.

In some locations, you cannot change this setting.

6. T

o control the SSID broadcast, select or clear the Enable SSID Broadcast check box.

When this check box is selected, the router broadcasts its network name (SSID) so that it

displays when you scan for local WiFi networks on your computer or wireless device.

7. T

o change the network name (SSID), type a new name in the Name (SSID) field.

The name can be up to 32 characters long and it is case-sensitive. The default SSID is

randomly generated and is on the router

’s label. If you change the name, make sure to

write down the new name and keep it in a safe place.

8. T

o change the wireless channel, select a number in the Channel list.

In some regions, not all channels are available. Do not change the channel unless you

experience interference (shown by lost connections or slow data transfers). If this

happens, experiment with dif

ferent channels to see which is the best.

When you use multiple access points, it is better if adjacent access points use different

channels to reduce interference.

The recommended channel spacing between adjacent

access points is four channels (for example, use Channels 1 and 5, or 6 and 10).

9. Click the Apply button.

Your settings are saved.

1 2 ... 113 114 115 116 117 118 119 120 121 122 123 ... 159 160

Žádné komentáře

Netgear R6220 Uživatelský manuál Strana 118