Netgear XSM7224S Uživatelský manuál Strana 146

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 579
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 145
ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Switching Commands 3-105
v1.0, November 2010
no lacp partner port priority
Use this command to configure the default LACP partner port priority.
lacp partner system id
Use this command to configure the 6-octet MAC Address value representing the administrative
value of the Aggregation Port’s protocol Partner’s System ID. The valid range of <system-id>
is 00:00:00:00:00:00 - FF:FF:FF:FF:FF.
no lacp partner system id
Use this command to configure the default value representing the administrative value of the
Aggregation Port’s protocol Partner’s System ID.
Format no lacp partner port priority
Mode Interface Config
Default 00:00:00:00:00:00
Format lacp partner system id <system-id>
Mode Interface Config
Note: This command is only applicable to physical interfaces.
Format no lacp partner system id
Mode Interface Config
Zobrazit stránku 145
1 2 ... 141 142 143 144 145 146 147 148 149 150 151 ... 578 579

Komentáře k této Příručce

Žádné komentáře