Netgear WN2500RP Uživatelská příručka Strana 21

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 36
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 20
Extender Network Settings
21
Universal Dual Band WiFi Range Extender WN2500RP
IP Subnet Mask. The IP subnet mask associated with the LAN IP address of the
extender. The default is 255.255.255.0.
Gateway IP
Address. The IP address of the wireless network gateway.
Domain Name Server.
The IP address of the Domain Name Server (DNS) of the
wireless network.
Extender Wireless Settings
Name (SSID). The name (SSID) of the wireless network.
Region.
The location where the extender is operating.
Channel.
The channel of the wireless network.
W
ireless AP. On or Off.
Broadcast Name. On or Of
f.
W
i-Fi Protected Setup. Configured.
Show Statistics
Scroll to the bottom of the Status screen, and click Show Statistics. The following screen
displays:
The screen shows statistics for the LAN (local), and wireless LAN (WLAN) ports. For each
port, the screen displays the following:
Status. The status of the port.
TxPkts.
The number of packets transmitted on this port since reset or manual clear.
RxPkts.
The number of packets transmitted on this port since reset or manual clear.
Collisions.
The number of collisions on this port since reset or manual clear.
Tx B/s.
The current line utilization—percentage of current bandwidth used on this port.
Rx B/s.
The average line utilization for this port.
Up T
ime. The time elapsed since the last power cycle or reset.
Poll Interval. Specify the poll interval frequency
. If you change this value, click Set
Interval so that your change takes effect.
Zobrazit stránku 20
1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 35 36

Komentáře k této Příručce

Žádné komentáře