
4-1
v2.0, May 2006
Chapter 4
Advanced Configuration
This chapter describes how to configure the advanced features of your ProSafe 802.11a/g Dual
Band Wireless Access Point WAG302. The Advanced Configuration features are located under
Advanced in the main menu and provide the following functions:
• IP Settings. Using the wireless access point as a DHCP server for wireless clients.
• Hotspot settings. Enabling HTTP redirect.
• Wireless Settings: Configuring advanced wireless LAN parameters.
• Access Point Settings: Enabling wireless bridge and repeater modes.
IP Settings for Wireless Clients
You can turn this access point into a DHCP Server for wireless clients for both DHCP-enabled
wireless clients as well as for static-IP enabled clients. The default advanced IP wireless settings
usually work well. This feature is intended for use by a systems administrator. By default, this
feature is not enabled.
To use this wireless access point as a DHCP server:
1. From the main menu under Advanced, select IP Settings. The Advanced IP Settings for
Wireless Clients screen will display.
2. Check Use AP as DHCP server and select one of the following options for managing the
wireless clients:
• Accept DHCP Enabled Wireless Clients Only: The Access Point can only provide the
TCP/IP configurations to those wireless clients with the DHCP enabled.
• Accept Both DHCP Enabled and Static IP Configured Wireless Clients: The Access
Point will support wireless clients with the DHCP enabled and the static IP configured.
The Access Point will provide the preconfigured TCP/IP configurations for all wireless
stations connected to this Access Point.
Komentáře k této Příručce