Netgear Switch M4100 Uživatelský manuál stáhnout pdf (Strana 372)

100

101

372 | Chapter 20. SNMP

ProSafe M4100 and M7100 Managed Switches

CLI: Configure SNMP V3

(Netgear Switch) #config

(Netgear Switch) (Config)#users passwd admin

Enter old password:

Enter new password:12345678

Confirm new password:12345678

Password Changed!

change the password to “12345678”

(Netgear Switch) (Config)#users snmpv3 authentication admin md5

Set the authentication mode to md5

(Netgear Switch) (Config)#users snmpv3 encryption admin des 12345678

Set the encryption mode to des and the key is “12345678”

Web Interface: Configure SNMP V3

1. Change the user password.

If you set the authentication mode to MD5, you must make the length of password longer

than 8 characters.

a. Select Security > Management Security > User Configuration > User

Management.

A screen similar to the following displays.

b. Under User Management, scroll down and select the User Name admin check box.

Now admin appears in the User Name field at the top.

c. In the Password field, enter 12345678.

d. In the Confirm Password field, enter 12345678.

e. Click Apply to save the settings.

2. Configure the SNMP V3 user

1 2 ... 367 368 369 370 371 372 373 374 375 376 377 ... 558 559

Komentáře k této Příručce

Žádné komentáře

Netgear Switch M4100 Uživatelský manuál Strana 372

Komentáře k této Příručce

Související produkty a manuály pro Sítě Netgear Switch M4100