Netgear Switch M4100 Uživatelský manuál stáhnout pdf (Strana 460)

100

101

460 | Chapter 28. PIM

ProSafe M4100 and M7100 Managed Switches

PIM-SM

Protocol-independent multicast sparse mode (PIM-SM) is used to efficiently route multicast

traffic to multicast groups that can span wide area networks where bandwidth is a constraint.

Subnet 192.168.1.0/24

Source

Port

Port 1/0/9

Port

Subnet 192.168.3.0/24

IP 192.168.1.1

1/0/13

1/0/1

Subnet 192.168.6.0/24

Subnet 192.168.2.0/24

Subnet 192.168.5.0/24

Subnet 192.168.4.0/24

Host

IP 192.168.4.2

Port 1/0/10

Port

1/0/11

Port

1/0/21

Port 1/0/22

Switch A

Switch D

Switch B

Switch C

Port 1/0/22

Port

1/0/24

Port

1/0/21

Figure 46. PIM-SM

PIM-SM uses shared trees by default and implements source-based trees for efficiency; it

assumes that no hosts want the multicast traffic unless they specifically ask for it. It creates a

shared distribution tree centered on a defined rendezvous point (RP). Traffic from this source

is relayed to the receivers. Senders first send the multicast data to the RP, which in turn

sends the data down the shared tree to the receivers. Shared trees centered on an RP do not

necessarily provide the shortest, most optimal path. In such cases PIM-SM provides a means

to switch to more efficient source-specific trees. A data threshold rate is defined for toggling

1 2 ... 455 456 457 458 459 460 461 462 463 464 465 ... 558 559

Komentáře k této Příručce

Žádné komentáře

Netgear Switch M4100 Uživatelský manuál Strana 460

Komentáře k této Příručce

Související produkty a manuály pro Sítě Netgear Switch M4100