Netgear Switch M4100 Uživatelský manuál stáhnout pdf (Strana 502)

100

101

502 | Chapter 29. DHCP L2 Relay and L3 Relay

ProSafe M4100 and M7100 Managed Switches

A screen similar to the following displays.

b. Under IP Interface Configuration, scroll down and select the Port 1/0/15 check box.

c. In the IP Address

Configuration Method field, enter Manual.

d. In the IP Address field, enter 10.200.1.1.

e. In the Subnet Mask field, enter 255.255.255.0.

f. In the Routing Mode field, select Enable.

g. Click Apply to save the settings.

5. Create a routing interface and assign 10.200.2.1/24 to it.

a. Select Routing > IP >

Advanced > IP Interface Configuration.

A screen similar to the following displays.

b. Under IP Interface Configuration, scroll down and select the Port 1/0/16 check box.

c. In the IP

Address Configuration Method field, enter Manual.

d. In the IP

Address field, enter 10.200.2.1.

e. In the Subnet Mask field, enter 255.255.255.0.

f. In the Routing Mode field, select Enable.

g. Click Apply to save the settings.

6. Redistribute the connected routes to RIP

a. Select Routing > RIP >

Advanced > Route Redistribution.

1 2 ... 497 498 499 500 501 502 503 504 505 506 507 ... 558 559

Komentáře k této Příručce

Žádné komentáře

Netgear Switch M4100 Uživatelský manuál Strana 502

Komentáře k této Příručce

Související produkty a manuály pro Sítě Netgear Switch M4100